4 Cone Diffusers

4 Cone Supply Diffusers with integral round necks are recommended for heating, ventilating and cooling. Round-neck-to-square-face construction results in 360 degree air diffusion pattern similar to a full round diffuser.

High diffusion induction rates result in rapid temperature and velocity equalization of the mixed air mass well above the zone of occupancy. Horizontal performance assures confident use of cooling temperature differential of 30 degrees Farenheit and greater, at predicted low air motion 35 fpm in the zone of occupancy.

DF4 Supply Diffusers perform efficiently with air loadings of 6 to 30 air changes per hour (based on 10 ft. ceiling height), and sound level range of NC 25 to 35. Core is removable to facilitate access to duct.

GENERAL FEATURES

  • Heavy-gauge all-steel construction.
  • Ideal for VAV systems.
  • Powder paint coating – White (other colors available upon request).
  • Screw driver adjustment of OBD through diffuser face.
  • One model suits both T-Bar and Drywall installations.
  • 2″ high collar available.
  • Matching OBD dampers, baffles and plaster frames available.
Category:

Description

DF4   Metal Back, 1″ Collar

 

  • Full face 24″ x 24″ for neck sizes 6″-8″-10″-12″-14″ D.
  • R4 or R6 insulation on back pan available.
  • Removable core can be removed without tools.
Photo 1 - 4 Cone Diffusers.

DF4D   Distributors Choice – 2″ Collar, One Per Box

  • 2″ high, tapered collar with pull-out lips for easy flex connexion.
  • One diffuser per box.
  • Full face 24″ x 24″ for neck sizes 6″-8″-10″-12″-14″ D.
  • R4 or R6 insulation on back pan available.
  • Removable core can be removed without tools.

DF4I   Insulated Metal Plenum, Removable Core & Any Size Neck

 

  • Full face 24″ x 24″.
  • R6 molded fiberglass insulation, taped on back-pan and scored for openings up to 12″.
Photo 2 - 4 Cone Diffusers.

DA4   Adjustable, Removable Core

 

  • Full face 24″ x 24″ for neck sizes 6″-8″-10″-12″-14″ D.
  • Adjustable air flow pattern, independant in each direction.
  • Removable core can be removed without tools.
  • R4 or R6 insulation on back pan available.
Photo 3 - 4 Cone Diffusers.

Accessories

N4   Radial Opposed Blade Damper

N5   Radial Sliding Blade Damper

PERFAIR-CT   PERFAIR Plenum for High Performance Circular Diffusers, Top Connection

PF   Plaster Frame for Diffusers

NBD   Baffle for DF diffusers

NBI   Baffle for ISO diffusers

NT   Frame for narrow t-bar

NTSR   Square-to-Round Transition

NTRR   Round Neck Reducer

NTSS   Square-to-Square Transition

NR6MFG   R6 Molded Fiberglass Backpan

FLEXRIGHT   Radius forming brace for flexible ducts

N4   Radial Opposed Blade Damper

  • Galvanized steel construction.
  • 6″, 8″, 10″, 12″ and 14″ D available.
  • Vertical operator accepts standard screwdriver for slotted or hex head thru diffuser face.
Photo 4 - 4 Cone Diffusers.

N5   Radial Sliding Blade Damper

  • Galvanized steel construction.
  • 6″, 8″, 10″ and 12″ D available.
  • Vertical operator accepts standard screwdriver for slotted or hex head thru diffuser face.
Photo 5 - 4 Cone Diffusers.

PERFAIR-CT   PERFAIR Plenum for High Performance Circular Diffusers, Top Connection

Please note that we don’t supply this product anymore. PERFAIR-CT Plenum for High Performance Circular Diffusers are now supplied by EffectiV HVAC only. For more information about PERFAIR-CT, please visit EffectiV’s PERFAIR-CT Page

PF   Plaster Frame for Diffusers

New exclusive and patent pending design for Airvector®’s Plaster Frame for an easier and much faster install than any other similar product on the market.

  • All aluminum
  • 2 ways to install: standard or quick-tabs (Airvector® exclusive).

See how Airvector®’s Plaster Frame can save you a lot of time and money!

Photo 6 - 4 Cone Diffusers.

NBD   Baffle for DF diffusers

  • Black, pie shape baffle.
  • Easy to install (clip on).
  • Available for 6″, 8″, 10″, 12″ and 14″ D neck sizes.

NBI   Baffle for ISO diffusers

  • Exclusive design!
  • Very efficient, the NBI baffle completely blocks one direction by being installed on the outlet instead of in the neck.
  • Can combine to block air directions to provide 1-way, 2-way adjacent or opposed and 3-way air patterns.
  • Easy to install in a few seconds.
  • Available for 12″ x 12″ and 24″ x 24″ Plaque Diffusers (ISO).

See how Airvector®’s NBI is easy to install and remove!

NT Frame for narrow t-bar

Aluminium construction

NTSR   Square-to-Round Transition

  • Available for all standard square dimensions to all standard round neck dimensions.
  • Powder Coated White for better aspect in the ceiling.
  • 1″ Drawn Collar.
  • Compact Design.

NTRR   Round Neck Reducer

Round-to-Round Transition

NTSS   Square-to-Square Transition

Available for most standard dimensions.

NR6MFG   R6 Molded Fiberglass Backpan

R6 insulated backpan used with Airvector® diffusers. Made of molded fiberglass with a foil layer on the exterior, our NR6MFG backpans are pre-scored for neck sizes from 6″ to 16″. Available in 24″x24″, either 3.25″ or 4″ deep.

Photo 7 - 4 Cone Diffusers.

FLEXRIGHT   Radius forming brace for flexible ducts

FEATURES

  • Forms efficient 90 degree elbows.
  • One-Size-Fits-All: adjustable hands conform to fit flexible duct Sizes 4″ – 16″. (102mm – 406mm)
  • Eliminates flex duct kinks and restrictions.
  • Improves airflow, saves energy
  • Can be installed on new or existing flexible ducts.
  • Equally great for residential and commercial applications.
  • U.L. listed.
  • Green product made of 100% recycled materials.
Photo 8 - 4 Cone Diffusers.